There is a button at the bottom of the device. Slide button to “On”

You can press anywhere around the edge of the top to start/pause music or hang up a call (if music was playing, it will resume). By gently turning the top, you can adjust volume. The arrow buttons (on either side of the center button) will change music track up/down. And that large button in the center is the Voice Command access button. When you press it, you can directly give TweeBot a command (without need to use the trigger phrase “Hello Tweebaa”).

Before you begin, please enable the following features on your device. Bluetooth and your assistant (ex: Siri, OK Google, Cortana, S voice, Hands Free mode, etc.)

You: “Hello Tweebaa.”
TweeBot: “Say a command.”
You: “Pair Mode.”
TweeBot: “Pair Mode. Enable the Bluetooth search function on your device.”
Now, search for and select TweeBot within the Bluetooth section of your mobile device. Once a connection is made...
TweeBot: “ Your phone is connected.”

Turn the top bezzle left (Volume up) or right (Volume down)
TweeBot will say volume MAX or you will hear a beep when volume is all the way up.

Say: "Hello Tweebaa"

Say: "Hello Tweebaa" (TweeBot will ask you to say a command)
Say: “What's the battery level?” (TweeBot will tell you what the TweeBot battery level is (bluetooth device) and what your mobile device battery level is).

Say: "Hello Tweebaa" {TweeBot will ask you to say a command}
Say: "Phone Command"
TweeBot will beep twice. Wait a second or two to hear the Siri beeps.
Say: Play music (your device should autoplay)
[if you want a specific app, ask for it]
-Ex. Play Pandora

Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Redial.”
TweeBot: “Redialing last outgoing call.”

Say: “Hello Tweebaa.” TweeBot: “Say a command.”
Say: “Redial.”
TweeBot: “Redialing last outgoing call.”

Say: “Hello Tweebaa.” TweeBot: “Say a command."
Say: “What can I say?”
TweeBot: “You can say pair mode, am I connected, phone command, check battery, redial, call back, what can I say, or cancel.”

TweeBot: incoming ring sound “Call from xxx-xxx-xxxx Answer or ignore?”
Saying “Answer” will answer the call and make TweeBot a speakerphone for your connected device.
Saying “Ignore” sends the incoming call to voicemail and returns voice command to TweeBot.”

To send a text message using Apple’s Siri (note: similar dialogue can be used for Android devices):
Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Phone Command.”
TweeBot: “Activating Phone Command.”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
Say: “Send a text to John Doe.”
Siri: “Okay what do you want to say to John Doe?”
Say: “I will be about 15 minutes late for our meeting.”
Siri: “ Your message to John Doe says ‘I will be about 15 minutes late for our meeting.’“Ready to send it?”
Say: “Yes.”
The message will now send.

Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Phone Command.”
TweeBot: “Activating Phone Command.”
Say: "Read last text message"

The buttons on the top of Tweebaa allow for manual control. The arrows skip songs, the play button pauses and plays, and the stop button ends the song. The bezzle controls volume. Also, you may use the in-phone controls. (the current version does not allow for voice commands during music playback)
How can I ask interesting questions to TweeBot?
Say: "Hello Tweebaa" {TweeBot will ask you to say a command}
Say: "Phone Command"
after beeps
Say your question. (Ex. SAY: How many ounces in a pound?)
Depending on the question, you will either hear an audible answer, or the search engine results will be displayed on your device.)

When music is playing, press anywhere on the top (smartControl) to pause the music. Wait for several seconds to hear two beeps that signify voice command is now available. Say “Hello Tweebaa” or press the Override Button (center button with microphone) to issue your next command.

Say: "Hello Tweebaa" {TweeBot will ask you to say a command}
Say: "Phone Command"
after beeps
Say your question. (Ex. SAY: How many ounces in a pound?)
Depending on the question, you will either hear an audible answer, or the search engine results will be displayed on your device.)

The warranty will be voided if any cord other than the provided TweeBot charge cord is used.

Say: "Hello Tweebaa" (TweeBot will ask you to say a command)
Say: “Phone Command”
TweeBot will beep twice. Wait a second or two to hear the Siri beeps.
Say: “Whats the weather?”

To send an email using Apple’s Siri (note: similar dialogue can be used for Android devices):
Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Phone Command.”
TweeBot: “Activating Phone Command.”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
Say: “Send an email to John Doe.”
Siri: “Which email do you want to use for John Doe?” (if multiple emails exist)
Say: “JohnDoe at email dot com.”
Siri: “ What would yo like your subject line to say?”
Say: “say your preferred subject line”
Siri: "okay, what would you like to say?"
Say: "say what you want written in the email"
Siri will read it back and ask if you would like to send it.
Say: “Send”

Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Phone Command.”
TweeBot: “Activating Phone Command.”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
Say: "Read last email message"

*This Siri command will trigger Tweebot begin to read your last email with time received, sender name, email subject and full content of the last email.

Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Phone Command.”
TweeBot: “Activating Phone Command.”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
Say: “Read my email from (name of person)”

*This Siri command will trigger TweeBot to read emails from the specified sender. If there is only one email from that sender, TweeBot will read the whole email content. If there is more than one email from that sender, TweeBot will read time and email subject.

Say: “Hello Tweebaa.”
TweeBot: “Say a command.”
Say: “Phone Command.”
TweeBot: “Activating Phone Command.”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
Say: “Read my email” or “Read email”

*This Siri command will trigger Tweebot to recite the list of your emails, including time received, email subject and sender name (No content). If there are too many new emails, you will be asked, “Would you like to hear more”. If wants to continue to hear more then say “Yes”.

If you are using an older phone with Bluetooth, it might be necessart to enter a password during the pairing. The code to use is 0000 (four zeroes).

TTweeBot is compatible with the following operating systems:
Apple : iOS6.0 and up
Android : Android 4.0 and up
Windows : WP8.1 or up

The “Hey Siri® ” function allows iOS users to speak with Siri® without pressing the phone’s home button, and to speak through TweeBot® without needing the “Hello Tweebaa” and “Phone command” steps.

In order to use “Hey Siri®” with TweeBot, make sure the feature is activated on your phone. Make sure both “Siri®” and “Allow Hey Siri®” are both set to ON.

iOS8 device must be plugged in to a power source to use “Hey Siri®” function with TweeBot®. Just say “Hey Siri” to use phone command – no need to say “Hello Tweebaa” first.

The voice command can be temporarily disabled by pressing and holding the button on the top of Tweebot. Hold it for a few seconds until an audible confirming signal is heard. To resume normal operation, press and hold again. If power is switched off, when turned back on Tweebot will have full voice command functioning.
Note: After Voice Command is off, you are still able to receive calls.

You can use TweeBot anywhere, but do keep in mind that TweeBot is NOT waterproof so keep it out of the rain or in wet conditions.

To check battery level of TweeBot, just say “Hello Tweebaa”, wait for the beep, then say “Check Battery”. TweeBot wil report the level of “Bluetooth device” (TweeBot) and the phone or other device’s battery level. If there is no device connected to Bluetooth, TweeBot will only report the battery level of TweeBot as “Bluetooth device”.

A fully-charged Tweebot will last for up to 20 hours of use.

When TweeBot is charging, the LED status indicator will be red. When fully charged, the red status indicator LED will go off.

After you give the Phone Command to TweeBot, TweeBot will beep twice (TweeBot is not yet ready to accept your next command). Wait a second or two to hear the Siri beeps, then give your voice command to Siri as you normally would.

You: “Hello Tweebaa”
TweeBot: “Sayacommand”
You: “Phone command”
TweeBot: “Activating phone command”

Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal. You can tell TweeBot to set a reminder. For example, "Remind me to meet Doug for dinner at 6 p.m." or "Remember to call Margaret today at 3 p.m.”

You will be asked to confirm. Say “confirm” to add or “cancel” to cancel.

You can tell TweeBot to add items to a list...could be a shopping list, a to-do list, etc. First, you need to create your List in your reminders. Launch the “Reminders” app on your iOS device. Tap the “+” sign by New List at the top.



Change title to “Shopping List” (or whatever you want to call it). Tap “Done” (top right corner).
After Siri’s two-beep signal...
You: Say your command, for example “Add peanut butter to my shopping list”

You will be asked to confirm to add to the list. Say “confirm” to add or “cancel” to cancel.

Stay connected via social media...TotallyHandsFree !
Note: In order to use this command, your iOS device needs to have Facebook and/or Twitter account connected.
First, the Facebook and/or Twitter Apps need to be installed on your iOS device. Go to Settings > Facebook or Twitter to sign in to your Facebook and/or Twitter accounts.




You: “Hello Tweebaa”
TweeBot: “Say a command”
You: “Phone command”
TweeBot: “Activating phone command”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
You: “Post on Facebook ” or “Post on Twitter ”
TweeBot: “What would you like to say?”
Dictate the message that you would like to post on Facebook /Twitter . After confirmation of the content, say “send”.

Don’t fumble with buttons on your phone while driving! Use TweeBot to get directons, totally hands free!

You: “Hello Tweebaa”
TweeBot: “Say a command”
You: “Phone command”
TweeBot: “Activating phone command”
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
You: “Get directions to (say where)
Your iOS device will open the Maps APP and calculate directions. Then it will dictate the directions via TweeBot.

The shape of TweeBot makes it a PERFECT FIT for cupholders, whether in a car, on a bike, etc. Also, this shape is designed for excellent sound quality.

Yes. It’s very easy to call back the last incoming call.

You: “Hello Tweebaa”
TweeBot: “Say a command”
You: “Call Back.”
TweeBot: “Calling Back xxx-xxx-xxxx.”

If there is no Bluetooth device connected to TweeBot, the response will be “Attempting to connect.” After a few seconds: “No phone found.”

The best gifts are the most unique ones. TweeBot is exclusively available at Tweebaa.com and it is totally hands free! Not only does it help people drive more safely (keep eyes on the road and hands on the wheel), it is totally portable, enables people to talk-text-post-and-tweet when hands are busy, and it’s also really fun to use!

Yes, you do. TweeBot is the device that will enhance your Siri experience to a higher level. Using Siri requires your hands to operate the phone as you need to turn on Siri before you can say a command. The built-in “Hey Siri” feature allows you to operate Siri hands-free but requires the phone to be plugged into a power outlet. In other words it is restricted when using even you are using “Hey Siri”. With Tweebot, you can operate iphone with Siri completely hands-free no matter if your phone is plugged in or not. It is a truly totally hands free experience that a standard iPhone 6 with Siri cannot provide.

Yes, you do. There are many additional benefits of using TweeBot with your iphone6s/plus.
Here are some benefits of using TweeBot in unison with iPhone 6s/plus:

• Check your phone battery hands-free (even Siri doesn’t tell you this hands-free). Don’t fumble around with your phone while driving to check battery level; just ask TweeBot “Check battery level”. TweeBot will respond with battery level both of your device AND TweeBot.
• Excellent sound quality – TweeBot’s surround-sound speaker is great for music, for hands-free phone calls, and so much more!

Enjoy the convenience of audio-books and the excellent speaker quality of TweeBot. First, enable the following function on your iPhone:
1. Go to Settings-->General --> Accessibility --> Speech
2. Then turn on "Speak Screen"

Now you are ready to give TweeBot the command:
You: "Hello Tweebaa"
TweeBot: "Say a command"
You: " Phone command"
Wait to hear TweeBot’s two-beep signal followed by Siri’s two-beep signal.
You: "open iBooks"
It will open the iBooks App

Next, choose the book that you want to read. After you open the book, swipe two fingers down from the top of the screen vertically. TweeBot will start reading the iBook.